GEAR HOUSING ASSEMBLY REPLACEMENT - CONTINUED
INSTALLATION - CONTINUED
Install three shorter bolts in locations E, F, and I.
Install nine longer bolts in locations A through D, G, H, and J through L.
Tighten bolts to 43-54 lb-ft (58-73 Nm), in letter sequence shown.
Remove gear case indexing plate (9).
Install bolt (1) and new washer (2) in adjustable idler gear oil supply hole. Tighten bolt to 15-19 lb-ft (20-26 Nm).
Install bolt (3) and new washer (4) in adjustable idler gear holding access hole. Tighten bolt to 43-54 lb-ft (58-73 Nm).