CAMSHAFT AND BEARINGS REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Due to size and bulk of camshaft, care must be taken and two persons used to lift camshaft. Use non-metallic
sling positioned inboard of camshaft bearing no. 1 and no. 7 to prevent damage to equipment.
Using slings, slide camshaft (5) toward rear to disengage dowel (27) from camshaft drive gear hub (28). Remove cam-
Upper and lower bearing shells are in sets and cannot be interchanged. If either upper or lower bearing is
replaced, upper and lower bearing shells must also be replaced to prevent damage to equipment.
Remove seven lower camshaft bearing shells (29). Keep lower bearing shells with their corresponding upper camshaft
bearing shells (24) and camshaft bearing caps (23).