FLEX PLATE MAINTENANCE - CONTINUED
Remove 12 bolts (4) securing flex plate (9), four disks (10), and disk assembly (11) to coupling (12).
Separate disk assembly (11) from four disks (10).
CLEANING AND INSPECTION
Compressed air used for cleaning or drying purposes, or for clearing restrictions, should never exceed 30 psi
(207 kPa). Wear protective clothing (goggles/shield, gloves, etc.) and use caution to avoid injury to person-
Use detergent and water to clean all parts. Dry with compressed air.
Ensure all surfaces of coupling, disk assembly, disks, and flex plate are clean and free from any foreign material.
Inspect parts for rust, cracks or damage. Replace damaged parts.
Inspect all parts for wear. Replace worn parts.