TM 9-2320-302-34
0021 00-2
ACCESSORY DRIVE REPLACEMENT - CONTINUED
0021 00
INSTALLATION
1.
Lubricate new seal ring (4) with clean lubricating oil and install in groove on accessory drive (2).
NOTE
Install accessory drive with word UP cast into housing in 12 oclock position.
2.
Install accessory drive (2) on gear case cover (3), engaging accessory drive gear (5) with bull gear (6).
3.
Align bolt holes of accessory drive (2) and gear case cover (3). Press accessory drive (2) into place and install five bolts
(1).
4.
Tighten bolts (1) to 22-28 lb-ft (30-38 Nm), in sequence shown.
2
1
4
3
2
5
4
1
3
TIGHTENING SEQUENCE