TM 9-2320-302-34
0017 00-1
BREATHER TUBE REPLACEMENT
0017 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Direct Support
Tools and Special Tools
Tool kit, general mechanics (Item 132, WP 0126 00)
REMOVAL
1.
Loosen hose clamp (1) and disconnect hose (2) from rocker arm cover (3).
2.
Remove two bolts (4) and spacer (5) from engine block (6).
3.
Remove breather tube (7) and two clamps (8).
4.
Loosen hose clamp (9) and remove hose (2) from breather tube (7).
INSTALLATION
1.
Install hose (2) on breather tube (7) and tighten hose clamp (9).
2.
Install breather tube (7) and two clamps (9).
3.
Install spacer (5) and two bolts (4) on engine block (6).
4.
Connect hose (2) to rocker arm cover (3) and tighten hose clamp (1).
END OF WORK PACKAGE
3
1
2
9
7
5
8
4
8
4
6