TM 9-2320-302-34
0016 00-4
ROCKER ARM COVER REPLACEMENT - CONTINUED
0016 00
INSTALLATION - CONTINUED
NOTE
To ease gasket installation, lightly spray a solution of soapy water into seal groove of rocker arm cover.
3.
Position rocker arm cover gasket (9) in rocker arm cover (5).
4.
Install rocker arm cover gasket (9), beginning at corners (7) of saddle arch (8) on each end of rocker arm cover (5).
Work back into saddle arch equally from each corner (7), pushing gasket firmly into rocker arm cover groove.
5.
Beginning at center of rocker arm cover (5), install long runs of rocker arm cover gasket (9) toward corners (7) of saddle
arches (8) and continue until gasket installation is completed.
6.
Apply a thin bead of gasket forming compound in front and rear corners (12) of cylinder head (6) where front and rear
cam caps are located.
7.
Position rocker arm cover (5) on cylinder head (6).
8.
Install ten bolt assemblies (4) in rocker arm cover (5).
8
7
9
5
6
5
4
12
6