44.3 TROUBLESHOOTING FLASH CODE 44
Perform the following steps to troubleshoot Flash Code 44.
Multiple Code Check
Perform the following steps to check for multiple codes.
1. Turn vehicle ignition switch ON.
2. Plug in the diagnostic data reader (DDR).
3. Read active codes.
[a] If active codes other than 110/0 or 175/0 are logged, service them first.
[b] If active codes 110/0 or 175/0 are logged, and no other codes are logged, oil or
coolant temperature was higher than it should have been. Inspect for damage. Plug in
the reader and determine if code is coolant or oil temperature high.
[c] If active code 110/0 is logged, and the duration of this code is less than 20 seconds,
or if it has multiple occurrences which average less than 20 seconds each, contact
Detroit Diesel Technical Service.
For information concerning high temperature levels, refer to section 4.1 in the service
All information subject to change without notice.
6SE497 9709 Copyright © 1997 DETROIT DIESEL CORPORATION