TROUBLESHOOTING FLASH CODE 15
[b] If any codes except code 175/4 are logged, refer to section 15.3.5.
Temperature Sensor Circuits
Check Coolant Temperature Sensor Connectors
Perform the following steps to check the CTS connectors.
1. Check terminals at the CTS connector (both sensor and harness side) for damage; bent,
corroded and unseated pins or sockets. See Figure 15-3.
[a] If terminals and connectors are in good condition, replace the CTS.
Refer to section 15.3.10.
All information subject to change without notice.
6SE497 9709 Copyright © 1997 DETROIT DIESEL CORPORATION