[b] If the measured resistance is less than 45,000 or greater than 48,000 , the wire is
shorted to voltage, or is opened. Repair wire. Refer to section 10.4.9.
Perform the following steps to verify repairs.
1. Ensure all removed connections are installed.
2. Turn ignition ON.
[a] If the light comes on for five seconds, then goes out, troubleshooting is complete.
[b] If the light comes on and stays on, refer to section 10.4.1.
[c] If the light does not turn on, all troubleshooting is complete. Review this section and
contact Detroit Diesel Technical Service.
All information subject to change without notice.
6SE497 9709 Copyright © 1997 DETROIT DIESEL CORPORATION