TM 9-2320-302-20
0218 00-3
CAB ROOF AIR DEFLECTOR REPLACEMENT - CONTINUED
0218 00
MOUNTING HARDWARE REMOVAL - CONTINUED
5.
Remove two nuts (22), screws (23), channel (13), swivel spacers (24), swivel plates (25), and rubber seals (26) from cab
roof.
6.
Remove lock nut (27), two washers (28), screw (29), and bottom pivot bracket (30) from channel (13). Discard lock nut.
MOUNTING HARDWARE INSTALLATION
NOTE
Perform steps 1 through 6 at each side of cab roof.
1.
Install bottom pivot bracket (30) on third hole from front of channel (13) with screw (29), two washers (28), and new
lock nut (27).
23
13
24
25
26
22
29
28
13
30
28
27