TM 9-2320-302-20
0218 00-2
CAB ROOF AIR DEFLECTOR REPLACEMENT - CONTINUED
0218 00
MOUNTING HARDWARE REMOVAL
NOTE
Perform steps 1 through 6 at each side of cab roof.
1.
Remove lock nut (5), two washers (6), screw (7), and top pivot bracket (8) from strut (9). Discard lock nut.
2.
Remove lock nut (10), two washers (11), screw (12), and strut (9) from channel (13). Discard lock nut.
3.
Remove nut (14), washer (15) and screw (16) and channel (13) from support bracket (17).
4.
Remove two nuts (18), reinforcing plate (19), gasket (20), two screws (21), and support bracket (17) from rear of cab
roof.
7
6
8
9
6
5
14
15
13
12
11
9
11
10
17
21
20
19
18
16