TM 9-2320-302-20
0192 00-4
SEAT REPAIR - CONTINUED
0192 00
DISASSEMBLY - CONTINUED
22.
Using blocking between upper plate (8) and riser (59) to hold upper plate in fully raised position.
NOTE
Perform steps 23 and 24 to remove air spring.
23.
Disconnect air line (31) from air spring (60).
24.
Remove screw (61), screw (62), washer (63), and air spring (60).
NOTE
Perform steps 25 and 26 to remove damper.
25.
Remove two push-on fasteners (64), washers (65), and damper (66) from lever (67) and riser (59). Discard push-on fas-
teners.
26.
Press two bearings (68) from damper (66).
27.
At front of upper plate (8), remove two screws (69) from bearing blocks (70).
28.
At rear of riser (59), remove two screws (71) and stop blocks (72).
29.
Remove blocking supporting upper plate (8).
30.
Slide upper plate (8) forward and rearward to remove upper plate from bearing blocks (70) and slide blocks (73).
68
66
65
64
60
31
72
59
71
82
76
62
63
7770
79
78
73
75
81
69
67
74
61
80
8