HOOD ADJUSTMENT - CONTINUED
Tilt hood (1) to fully open position (TM 9-2320-302-10).
Repeat steps 2 and 3 for both sides of vehicle.
Loosen four lock nuts (4) just enough to allow hood (1) to slide forward and backward for adjustment.
Loosen lock nut (5) just enough to allow hood (1) to slide side-to-side for adjustment.
In step 4, lock nut must be kept tight enough for brackets to remain stationary despite pulling force of
hood tilt assist springs.
Repeat step 4 for both nuts.
Loosen lock nut (6) just enough to allow hood (1) to slide for adjustment.
Prior to performing step 5, ensure that hood is centered and that components do not touch under hood when
hood is lowered.
Close hood (1) and fasten two hood latches (7).