TRACTOR PROTECTION VALVES REPLACEMENT - CONTINUED
REAR TRACTOR PROTECTION VALVE REMOVAL
Tag tubes to aid in installation.
Disconnect four tubes (13) and remove four connectors (14) from tractor protection valve (15).
Remove two lock nuts (16), washers (17), screws (18), washers (19), and tractor protection valve (15). Discard lock
FRONT TRACTOR PROTECTION VALVE INSTALLATION
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin
and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If
adhesives or sealing compound contacts skin or clothing, wash immediately with soap and water.
Ensure all air lines and fittings are clear of debris and excess pipe sealing compound does not enter air
lines or fittings. Failure to follow this warning could result in injury to personnel or damage to equip-
Install tractor protection valve (2) with two washers (12), screws (11), washers (10), and new lock nuts (9).
Coat threads with pipe sealing compound and install adapter (8), tee (7), valve (6), connector (5), three elbows (4), and
two coupling hoses (3).