TM 9-2320-302-20
0135 00-2
FRONT BRAKESHOE AND LINING REPLACEMENT - CONTINUED
0135 00
INSTALLATION
1.
Apply a thin film of antiseize compound to contact points (10, 11, 12, and 13), two spider anchor pins (8 and 9), and
small diameter of upper and lower cam rollers (3 and 5).
2.
Install retaining spring (7) on each brakeshoe (1 and 4).
3.
Install upper and lower brakeshoes (1 and 4) on two spider anchor pins (8 and 9).
4.
Install release spring (6) on upper and lower brakeshoes (1 and 4).
5.
Install upper cam roller (3) between upper brakeshoe (1) and s-cam (2).
6.
Install lower cam roller (5) between lower brakeshoe (4) and s-cam (2).
7.
Install front hub and drum (WP 0165 00).
END OF WORK PACKAGE
12
11
13
10
9
8
7
1
6
3
2
5
4