TM 9-2320-302-20
0127 00-1
TRANSMISSION OIL COOLER REPLACEMENT
0127 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanics (Item 36, WP 0236 00)
Materials/Parts
Nut, lock (P/N MS51922-33) (4)
Rags, wiping (Item 28, WP 0235 00)
References
TM 9-2320-302-10
Equipment Condition
Transmission oil cooler lines and fittings removed
(WP 0122 00)
REMOVAL
WARNING
Spilled oil is very slippery. Wipe up any spilled fluid immediately. Failure to follow this warning could
result in serious injury to personnel.
1.
Remove lock nut (1), washer (2), screw (3), washer (4), and oil sample valve (5). Set oil sample valve aside. Discard
lock nut.
2.
Remove three lock nuts (6), washers (7), screws (8), washers (9), and transmission oil cooler (10). Discard lock nuts.
3.
Remove three nuts (11), washers (12), cap screws (13), washers (14), and brackets (15).
6,7
8,9
11,12
3,4
5
1,2
11,12
10
15
13,14
13,14
15