TM 9-2320-302-20
0070 00-1
CHECK ENGINE SWITCH AND JUMPER HARNESS REPLACEMENT
0070 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanics (Item 36, WP 0236 00)
Materials/Parts
Tags, marker (Item 31, WP 0235 00)
References
TM 9-2320-302-10
REMOVAL
1.
Remove nut (1) and washer (2) from switch (3).
2.
Remove three screws and pull lower dash cover (4) away from dashboard.
3.
Remove switch (3) from lower dash cover (4).
NOTE
Tag wires to aid in installation.
4.
Remove two nuts (5), lock washers (6), and wires (7) from switch (3).
5.
Remove jumper harness connector (8) from vehicle harness (9).
INSTALLATION
1.
Install jumper harness connector (8) on vehicle harness (9).
2.
Install two wires (7) on switch (3) with two lock washers (6) and nuts (5).
3.
Install switch (3) on lower dash cover (4) with washer (2) and nut (1).
4.
Install lower dash cover (4) on dashboard with three screws.
END OF WORK PACKAGE
5
5
6
6
7
8
9
1
2
3
4