TM 9-2320-302-20
0054 00-1
ALTERNATOR BELT REPLACEMENT AND ADJUSTMENT
0054 00
THIS WORK PACKAGE COVERS
Removal, Installation, and Adjustment
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanics (Item 36, WP 0236 00)
Tensiometer, dial indicating (Item 32, WP 0236 00)
Wrench, torque, 15-75 lb-ft (Item 45, WP 0236 00)
References
TM 9-2320-302-10
REMOVAL
1.
Hold self-locking nut (1) and loosen hex cap screw (2).
2.
Loosen two cap screws (3 and 4) securing adjusting rod link (5) and rod (6) to engine.
3.
Loosen hex nut (7) and tighten hex nut (8) to loosen tension on drive belt (9).
NOTE
After loosening tension drive belt remains tight or is difficult to remove from pulleys, proceed to step 5.
4.
Remove drive belt (9) from alternator pulley (10), air conditioning compressor pulley (11), and accessory drive pulley
(12).
5.
Remove cap screw (3) and rotate alternator until drive belt (9) can be removed.
13
8
3
5
7
6
4
11
9
12
2
1
10