TM 9-2320-302-20
0040 00-2
EXHAUST SYSTEM FLEX PIPE, CLAMPS, AND HEAT SHIELD REPLACEMENT - CONTINUED
0040 00
REMOVAL - CONTINUED
4.
Loosen seal clamps (7 and 8) and remove exhaust hose (9) from exhaust pipe (6) and exhaust connector (10). Discard
seal clamps.
5.
Loosen hose clamp (11) and remove heat shield (12) from exhaust hose (9).
6.
Loosen two seal clamps (13 and 14) and remove exhaust connectors (10 and 15) from muffler. Discard seal clamps.
7.
Remove four nuts (16), two saddle clamps (17), and exhaust pipe (6) from two hanger brackets (18).
NOTE
Perform step 8 only if hanger brackets are damaged.
8.
Remove two screws (19), four washers (20), two lock nuts (21), and two hanger brackets (18) from frame rail (22). Dis-
card lock nuts.
10
8
9
19
20
1920
11
12
7
17
6
17
5
4
3
2
1
22
17
18
16
21
20
17
18
16
21
20
14
13
15