EXHAUST SYSTEM MUFFLER, STACK, AND HEAT SHIELD REPLACEMENT - CONTINUED
MUFFLER MOUNTING BRACKETS INSTALLATION
Position four new bushings (21) on mounting locations.
Install two muffler mounting brackets (19 and 20) with four screws (18), eight washers (17), and four new lock nuts
Install two retaining clamps (4) on muffler (9) with two bolts (15) and nuts (14).
New seal clamp may leak until exhaust system is thoroughly heated and sealed.
Ensure muffler with heat shield retaining clamps are positioned to allow mounting of heat shield.
Install new seal clamp (13) and muffler (9) on exhaust pipe with two saddle clamps (12), four washers (11), and nuts
(10). Tighten seal clamp.
EXHAUST STACK INSTALLATION
Ensure opening of exhaust stack is to the rear of the vehicle.
With assistance, install exhaust stack (8) on muffler (9) with two saddle clamps (7), four washers (6), and nuts (5).
HEAT SHIELD INSTALLATION
Ensure retaining clamps (4) are in place and secure.
With assistance, install heat shield (3) on retaining clamps (4) with eight washers (2) and bolts (1).
END OF WORK PACKAGE