TM 9-2320-283-20-3
STEERING SYSTEM.
3-212. STEERING SYSTEM TESTING (Continued).
LOCATION/ITEM
ACTION
REMARKS
A. INSTALLING POWER STEERING ANALYZER.
1. Hose (3), elbow
Remove from items (1) and
(4).
(2).
and connector
(7).
2. Analyzer (8).
Install into items (1) and
(7) (as shown in illustration).
3. Cap (5).
Remove from item (7).
4. Thermometer (6).
Place in item (7).
5. Engine.
Start and let idle at about
Refer to TM 9-2320-283-
600 rpm.
10.
CAUTION
Do not close valve of analyzer com-
pletely and
leave it closed, or the
pump may be damaged.
At no time
should fluid temperature exceed 180°F.
To prevent damage from high tempera-
tures,
perform
all tests within .a
temperature range of 125°F-135°F.
6. Analyzer (6).
a. Close valve part way until
pressure gage reads 1000
psi.
b. When item (6) shows between
125°F and 135°F, open
valve.
3-1256