TM 9-2320-283-20-3
GAGES (NONELECTRICAL).
3-314. PRESSURE GAGE REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
NOTE
Use this procedure to replace any one
of the two air pressure gages.
Lower
gage has an additional nut and ground
wire.
1. Panel (2).
Loosen four items (1), and
Use a screwdriver to
open.
prop item (2) open.
2. Socket and bulb
(5).
Remove from item (4).
3. Tube (6).
Remove from item (4).
4. Two nuts (9), lock-
Remove from item (4).
washers (8), and
bracket (7).
5. Gage (4).
Remove from item (2).
6. Overlay (3).
Remove from item (4).
If damaged.
7. All parts.
Clean and inspect.
Refer to paragraphs 3-4
and 3-5.
8. Overlay (3).
Install on item (4).
9. Gage (4).
Position in item (2).
If removed.
3-1818