TM 9-2320-283-20-3
ACCESSORY ITEMS.
3-298. HEATER ASSEMBLY REPLACEMENT AND REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
E. INSTALLATION (Continued).
30. Heater assembly
Set in place in cab.
(6).
Pull back item (5) as
necessary.
31. Two hoses (1) and
Put on item (6).
clamps (3).
32. Two clamps (3).
Tighten.
33. Two rods (7).
Put in closed position.
Push top item (7) up,
push bottom item (7)
down.
34. Two wires (8).
35. Two clips (9).
Put on two items (7).
Put on item (6) and two
items (8).
Keep two items (8) tight
with two items (7) in
closed position.
36. Three wires (2).
a. Connect.
b. Wrap connections with
electrical tape.
37. Mat (5).
Install under item (4).
38. Four nuts (22)
Install on four items (24).
and washers (23).
39. Two hoses (20)
Put on items (14).
and clamps (21).
40. Two clamps (21).
Tighten.
NOTE
Follow-on maintenance action required:
Install air cleaner assembly
(para 3-29).
Service cooling system (para 3-52).
3-1744