TM 9-2320-283-20-3
CAB AND BODY.
3-282. SEAT BELT REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
A. DRIVER'S SEAT BELT REPLACEMENT.
NOTE
Both sides of the driver's seat belt
are replaced
the same way, except as
noted in steps 2 and 6.
1. Nut (8) and belt
Remove from item (7).
assembly (4).
WARNING
Insulation material behind cab trim
panel can
cause
personal injury.
Always wear suitable protective cloth-
ing (gloves, goggles, face mask, etc.)
whenever cab trim panel
is being
removed.
2. Panel (1).
a. If removing right side of
belt (4), remove ten items
(6) and (5),
and pull item
(1) away from cab wall.
b. If removing left side of
belt (4), remove cab trim
panel. (Refer to paragraph
3-276).
3. Screw (3), lock-
Remove from item (9).
washer (2), and
belt assembly (4).
4. All parts.
Clean and inspect.
Refer to paragraphs 3-4
and 3-5.
5. Belt assembly
(4).
a. Position on item (9).
b. Secure with items (3) and
(2).
3-1656