TM 9-2320-283-20-3
SPRING, SHOCK ABSORBERS, AND TORQUE RODS.
3-250. SHOCK ABSORBER REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
NOTE
.Shock absorbers are replaced in pairs.
.Right and left side shock absorbers
are replaced
in same way.
Left side
shown here.
1. Two nuts (1) and
washers (2).
Remove from item (4).
2. Four bushings (3)
a. Remove from items (8)
and shock absorbers
(4).
and (9).
b. Remove four items (3)
from items (4).
Discard four items (3).
NOTE
If upper shock mounting bracket assem-
bly is damaged, do step 3; otherwise,
go to cleaning and inspection.
3. Four screws (5)
and nuts (6).
a. Remove from item (8).
b. Remove item (8) from item
(7).
4. All metal and
Clean and inspect.
rubber parts.
Refer to paragraphs 3-4
and 3-5.
3-1480