TM 9-2320-283-10
Item
No.
18
Table 2-1. Preventive Maintenance Checks and Services for Model M915A1
Interval
After
Location
Item to
Check/
Service
Trans-
mission
Crewmember
Procedure
DRIVER
With transmission temperature
gage between 120° and 250°F
while idling in neutral with
Drake applied, remove dipstick
and check oil level. Should
read between high and low
mark on the hot run band. If be-
ow the low mark on the hot run
band, add oil to bring level to
mid-point of band. About one
quart will raise level from bot-
tom line to middle of band.
The above method is preferred
but oil level may be checked
with transmission temperature
below 120°F by reading the
cold run band on the dipstick.
TRANSMISSION DIPSTICK
Not Fully Mission
Capable If:
2-48 Change 2