TM 9-2320-273-20
Set in place. Screw in and
tighten four screws (1).
Attach to valve (4) and
tighten screw (7).
PUSHER AXLE.
8-18. PUSHER AXLE UP-DOWN SELECTOR VALVE MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
6. Two elbows (3) and
Coat threads with liquid teflon
straight fitting (9).
and screw into valve (4).
7. Valve (4).
Attach to panel (5) with four
screws (8). Tighten screws.
8. Three air lines (2).
Screw into two elbows (3)
Supply line goes to center of
and straight fitting (9).
valve, air bag line goes to top
of valve, and lift cylinder line
goes to bottom of valve.
9. Panel (5).
10. Lever (6).
C. OPERATIONAL CHECK.
11. Engine.
Start up (see TM 9-2320-
273-10).
12. Pusher axle.
Check for proper raising and
lowering (see TM 9-2320-
273-10).
13. Engine.
Shut down (see TM 9-2320-
273-10).
8-48