TM 9-2320-273-20
SENDING UNITS, SWITCHING DEVICES, AND WINTERIZATION KIT.
5-75. NEUTRAL SAFETY SWITCH MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
A. REMOVAL (Continued).
4. Two wires (3).
Remove.
5. Two screws (7),
Remove.
washers (8) and
nuts (9).
6. Neutral safety
Remove.
switch (6).
B. INSTALLATION.
7. Neutral safety
switch (6).
8. Two screws (7),
washers (8) and nuts (9).
9. Two wires (3), washers
(4) and screws (5).
10. Ratio selector
side cover (1).
11. Nine screws (2).
c. OPERATIONAL CHECK.
12. Ratio selector
lever (10).
13. Engine.
Aline and install.
Install and tighten.
Install and tighten on
neutral safety switch (6).
Aline and install.
Install and tighten.
Set to N.
Start up (see TM 9-2320-273-10).
Install per
illustration.
5-272