TM 9-2320-273-20
STARTING AND STARTING CONTROL.
5-35. ENGINE RUN SWITCH MAINTENANCE (Continued).
LOCATION/ITEM
ACTION
REMARKS
A. REMOVAL.
1. Four quarter-turn screws (1).
Loosen.
2. Hinged instrument panel (2).
Lower.
3. Wire connector (4) and two wires (3).
Remove.
4. Hex nut (8).
Remove.
5. ENGINE RUN switch (5).
Remove from instrument
panel.
6. Lock cylinder (7).
Place switch in ON
position. Insert flat
tip punch in cylinder
extraction hole (6) and
remove lock cylinder (7).
I
5-105