5-6. TEST EQUIPMENT (Continued).
For example, the meters in
fig, 5-9 below show the following readings:
X1 OR RX1.
X10 OR RX10.
X100 OR RX100.
Figure 5-9. OHMS Switch Settings
f. Using the DC Volts Sea/e. The dc volts scale is used to measure all voltages in the electrical
Before using the multi meter to measure dc voltage, do the following steps that match the multi-
meter you have (fig. 5-10 thru fig. 5-1 2).
Set meter switch to dc volts range given in TM.. (To measure 24 volts dc, set switch
on 100 DC VOLTS range. )
Figure 5-10. Using the DC Volts Scale AN/URM-105