TM 9-2320-273-20
ETHER QUICK-START SYSTEM.
4-33. ETHER TUBE MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
B. INSPECTION.
3. Ether tube (3), solenoid
Look for:
valve (4), atomizer (2).
a. Cracks.
b. Leaks.
c. Kinks.
d. Damaged fittings.
C.
INSTALLATION.
4. Ether tube (3).
a. Screw onto solenoid valve
(4).
b. Screw onto atomizer (2).
NOTE
Coolant temperature must be below 50°F
or solenoid valve will not function.
D. OPERATIONAL CHECK.
5. INSTRUMENT PANEL/
Engine run switch must be ON.
Ether button.
6. Atomizer (2).
If mist is not observed, check
ether temperature switch
(para 5-74) ether cylinder
(para 4-30), so!enoid valve
(para 4-31), and atomizer
(para 4-32).
7. lNSTRUMENT/PANEL.
Engine run switch.
8. Atomizer (2).
9. Ether tube (3).
Push (2nd mechanic).
Observe ether mist
(1st mechanic).
Turn OFF (2nd mechanic).
a. Unscrew from ether
tube (3).
b. Screw into crossover
tube (1).
Screw onto atomizer (2).
Replace, if necessary.
4-114