Section ll ILLUSTRATED MANUFACTURING INSTRUCTIONS.
1/4 (6.35 mm) OUTER DIA.
SAEJ844, TYPE 3A
Figure E-1. 1/4 (6.35mm) O.D. Nonmetallic Tubing and Fittings,
Fabricate Tube From NSN 4720-01-058-7213
1. Determine tube part number needed from RPSTL and cut squarely to correct length as shown above.
2. Select proper end fittings based upon tube part number.
3. Insert tube into fitting and tighten nut with wrench until one thread remains visible on the fitting