TM 9-2320-273-20
FRAME.
11-9. BUMPER AND TOWING EYES MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
A. REMOVAL (Continued).
6. Bumper (1) and two
a. Remove.
towing eyes (4).
b. Inspect for rust or
Replace if necessary.
damage.
B. INSTALLATION.
7. Bumper (1).
Put in place against front
extension (3).
8. Two towing eyes (4)
Put eyes in place and insert
and eight capscrews (8).
capscrews.
9. Eight nuts (2).
Put on; tighten capscrews
(8) and nuts (2).
10. Clevis (6).
Position, slide in pin (7), and
secure with new cotter pin (5).
11. Bracket (14).
Install to bumper (1) with
M916 thru M920.
two screws (9), washers (11)
and nuts (12).
12. Bracket (13).
a. Install to bracket (14) with
M916 thru M920.
two screws (9), washers (11),
and nuts (12).
b. Install to bumper (1) with
M915.
two screws (9), washers (11),
and nuts (12).
13. Classification sign (10).
Install to bracket (13) with
M915 thru M920.
two screws (9), washers (11),
and nuts (12).
Follow-on maintenance action required:
Install brush guard (M916 thru M920 only);
refer to para 11-16F.
11-14
