WHEELS AND TIRES.
10-14. FRONT WHEEL BEARINGS AND SEALS MAINTENANCE (M916 THRU M920) (Continued).
C. PACKING AND INSTALLATION OF BEARINGS.
8. Inner bearing cone (3).
a. Use bearing packing tool
to pack with grease, or
pack by hand.
b. Place in hub and drum assembly
(5) so that smaller end will
point away from truck.
9. New oil seal (2).
Place in hub and drum assembly (5).
Do not use excessive pressure to install
seal. Do not tap seal after it has bot-
tomed. These actions will crush the set
sleeve and damage the seal.
Change 2 10-49