TM 5-2330-325-13&P
0097
MF-Made at field
Items with these codes are not to be requisitioned/requested individually. They must be
made from bulk material which is identified by the part number in the DESCRIPTION
MH-Made at below
AND USABLE ON CODE (UOC) column and listed in the bulk material group work
depot/ sustainment
package of the RPSTL. If the item is authorized to you by the third position code of the
level
SMR code, but the source code indicates it is made at higher level, order the item from
the higher level of maintenance.
ML-Made at SRA
MD-Made at depot
MG-Navy only
AF-Assembled by
Items with these codes are not to be requested/requisitioned individually. The parts that
field
make up the assembled item must be requisitioned or fabricated and assembled at the
level of maintenance indicated by the source code. If the third position of the SMR code
AH-Assembled by
authorizes you to replace the item, but the source code indicates the item is assembled at
below depot
a higher level, order the item from the higher level of maintenance.
sustainment level
AL-Assembled by
SRA
AD-Assembled by
depot
AG-Navy only
XA
Do not requisition an "XA" coded item. Order the next higher assembly.
(Refer to NOTE below.)
XB
If an item is not available from salvage, order it using the CAGEC and part number.
XC
Installation drawings, diagrams, instruction sheets, field service drawings; identified by
manufacturer's part number.
XD
Item is not stocked. Order an XD-coded item through local purchase or normal supply
channels using the CAGEC and part number given, if no NSN is available.
NOTE
Cannibalization or controlled exchange, when authorized, may be used as a source of
supply for items with the above source codes except for those items source coded "XA" or
those aircraft support items restricted by requirements of AR 750-1.
Maintenance Code. Maintenance codes tell you the level(s) of maintenance authorized to use and repair support
items. The maintenance codes are entered in the third and fourth positions of the SMR code as follows:
Third Position. The maintenance code entered in the third position tells you the lowest maintenance level
authorized to remove, replace, and use an item. The maintenance code entered in the third position will indicate
authorization to the following levels of maintenance:
0097-3
02/13/2013root(introwp)wpno(R1001)