ELECTRICAL GROUND POINTS - Continued
Solvent cleaning compound MIL-PRF-680, Type III is an environmentally compliant
and low toxic material. However, it may be irritating to eyes and skin. Use
protective gloves and eye protection. Use in well-ventilated areas. Keep away from
open flames and other sources of ignition. Failure to comply may result in death or
injury to personnel. Seek medical attention in the event of an injury.
Accidental or intentional introduction of liquid contaminants into the environment is
a violation of state, federal, and military regulations. Refer to Army Petroleum, Oils
and Lubricants (POL) for information concerning storage, use, and disposal of
these liquids. Use a drain pan or appropriate containment equipment to capture
any draining or leaking fluid. Refer to local procedures and plans for preventing
and responding to fluid spills or leaks. Comply with local regulations when
disposing of clean up material and leaked and spilled fluids. Failure to comply may
result in death or injury to personnel. Seek medical attention in the event of
Clean mounting hardware, ground cable terminal lugs, and ground point.
Look for cracks, loose terminal lugs, and stripped threads. Replace any defective parts.
Install hardware connecting ground cable terminal lug to ground point. Ensure that all hardware is tight.
END OF TASK