INTERNAL LEAKS ARE PRESENT
Do NOT exceed 1,100 psi (7,584.2 kPa) to avoid over pressurizing the hydraulic
system on the semitrailer. Failure to comply may result in death or injury to
personnel. Seek medical attention in the event of an injury.
Fully retract cylinder rod. Disconnect and cap hydraulic hose connected opposite of rod end
cylinder port. Apply pressure to rod end port and inspect for leakage out of open port. (Small
drops more than 10 seconds apart are acceptable.)
If more significant leakage is present, replace lift cylinder (WP 0081).
END OF WORK PACKAGE