TB 9-2320-360-13&P-2
DOGHOUSE ARMOR REPLACEMENT - CONTINUED
0034 00
CLEANING AND INSPECTION
Clean and inspect all parts IAW General Maintenance Instructions (WP 0011 00).
INSTALLATION
1.
Install lower panel (35), two washers (32), bolts (31), washers (34), and new locknuts (33).
2.
Install floor panel (8) and eight screws (25) in floor panel (8). Tighten screws to 84 lb-in. (10 Nm).
3.
Install upper bracket (22), two washers (26), new lockwashers (27), and bolts (28). Tighten bolts to 84 lb-in. (10 Nm).
4.
Install three washers (23), bolts (24), washers (30), and new locknuts (29) in upper bracket (22). Tighten locknuts to
35 lb-ft (48 Nm).
5.
Install backwall panel (20), bottom panel (21), six washers (19), and new locknuts (18) on vehicle. Tighten locknuts to
84 lb-in. (10 Nm).
6.
Install eight washers (15), new lockwashers (16), and bolts (17) in bottom panel (21). Tighten bolts to 84 lb-in. (10 Nm).
18
17
19
16
15
20
21
417-123
0034 00-5