LEFT CAB SIDE (REAR) ARMOR REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Attach sling and lifting device to two lifting eyes (31).
Remove eight locknuts (25) and washers (26) from left cab side (rear) armor (3). Discard locknuts.
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
Cab side (rear) armor weighs 240 lb (109 kg).
Remove six locknuts (30), washers (29), and cab side (rear) armor (3) from vehicle. Discard locknuts.
Remove 24 washers (27) from studs along left side of roof armor (28).
Remove sling and lifting device from left cab side (rear) armor (3).