RIGHT CAB SIDE (REAR) ARMOR REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Vehicle shown has one long bracket. Some vehicles may have two short brackets.
Remove eight locknuts (38), washers (39), bolts (44), and bracket (37). Discard locknuts.
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
Cab side (rear) armor weighs 240 lb (109 kg).
Remove two locknuts (35), washers (36), bolts (30), and lifting eyes (29). Discard locknuts.
Remove eight locknuts (34), washers (33), bolts (31), and washers (32) from cab side (rear) armor (24). Discard lock-
Remove six locknuts (40), washers (41), and two stud brackets (42) from cab side (rear) armor (24). Discard locknuts.
Separate cab side (rear) armor (24) from inner cab side armor (43).