TB 9-2320-360-13&P-1
A/C KIT INSTALLATION - CONTINUED
0003 00
IN-CAB COMPONENTS - CONTINUED
0003 00
(1)
Using template (WP 0057 00, Doghouse Front Engine Access Panel Template), cut 3-inch hole (16) in
doghouse front engine access panel (17) using 3-inch hole saw.
(2)
Install grommet (18) in 3-inch hole (16) on doghouse front engine access panel (17).
(3)
Drill three 9/32-inch holes in doghouse front engine access panel (17) using mounting holes (19) on grom-
met flange (20) as a template.
WAR N I N G
Adhesives and sealing compounds can burn easily, can give off harmful vapors and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in well-ventilated areas. If adhesive or
sealing compound gets on skin or clothing, wash immediately with soap and water.
(4)
Apply sealant to grommet (18) provided
with the kit.
(5)
Secure grommet (18) on doghouse front
engine access panel (17) with three
screws (21), provided with the kit.
HETF00378
n.
Modify doghouse top insulation.
Using template (22) (WP 0057 00, Doghouse
Top Insulation Template), cut doghouse top
insulation (23).
HETF00379
0003 00-18