TB 9-2320-360-13&P-1
A/C KIT INSTALLATION - CONTINUED
0003 00
UNDER-HOOD COMPONENTS - CONTINUED
b.
Install STE-ICE harness extension.
(1)
Disconnect STE-ICE fuel pressure trans-
ducer harness connections (6 and 7) on
secondary fuel filter assembly (2).
(2)
Install STE-ICE fuel pressure trans-
ducer harness extension to STE-ICE fuel
pressure transducer harness connections
(6 and 7).
(3)
Install plastic cable ties to secure con-
nections (6 and 7) as necessary.
HETF00354
6.
Compressor Installation.
N OT E
Do not remove the fuel filter and bracket assembly from the truck. Fuel filter and bracket assembly will be
installed on the new mounting hardware, provided with the kit.
Support the fuel filter assembly until compressor/fuel filter bracket, provided with the kit, has been installed.
a.
Remove fuel filter from filter housing (TM 9-2320-360-34).
b.
Remove secondary fuel filter assembly.
c.
Remove secondary fuel filter and bracket assembly (TM 9-2320-360-34).
d.
Install compressor/fuel filter supports, lower and upper bracket extension.
(1)
Install lower compressor/fuel filter sup-
port (1) with three screws (2) and lock-
washers (3), provided with the kit.
HETF00355
0003 00-9