TB 9-2320-335-13&P
24-15.2. REAR MOUNTING PLATE/BRAKE ADAPTER REPLACEMENT
(SERIAL NUMBERS 300000 AND ABOVE)
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic's tool kit:
TM 9-2320-387-10
automotive (Appendix B, Item 1)
TM 9-2320-387-24P
Maintenance and repair shop equipment:
Equipment Condition
automotive (Appendix B, Item 2)
Materials/Parts
Maintenance Level
Two locknuts (Appendix A, Item 114.4)
Direct support
Personnel Required
One mechanic
One assistant
a. Removal
Remove two locknuts (5), washers (4), capscrews (1), washers (2), and rear brake adapter mounting plate (6)
from rear crossmember (3). Discard locknuts (5).
b. Installation
Install rear brake adapter mounting plate (6) on rear crossmember (3) with two washers (2),
capscrews (1), washers (4), and locknuts (5). Tighten locknuts (5) to 90 lb-ft (122 Nm).
24-18