TB 9-2320-335-13&P
6-7. HALFSHAFT MAINTENANCE
This task covers:
a. Removal
d. Wear Sleeve Installation
b. Disassembly
e. Assembly
c. Cleaning and Inspection
f. Installation
Tools
Manual References
General mechanic's tool kit:
TM 9-2320-387-24P
automotive (Appendix B, Item 1)
Equipment Condition
Maintenance and repair shop equipment:
Wheel removed (TM 9-2320-387-24-1).
automotive (Appendix B, Item 2)
Brake protection guards removed
Materials/Parts
Boot service kit (Appendix A, Item 4)
General Safety Instructions
Clip (Appendix A, Item 11)
Drycleaning solvent is flammable and will not be
Cotter pin (Appendix A, Item 19)
used near an open flame.
Six two-piece lockwashers
Maintenance Level
(Appendix A, Item 191)
Unit
Lockwasher (Appendix A, Item 156)
Drycleaning solvent (Appendix C, Item 26)
Lithium grease (Appendix C, Item 36)
Sealing compound (Appendix C, Item 63)
Wear sleeve (Appendix A, Item 311.1)
a. Removal
1.
Remove access plug (8) and washer (7) from geared hub (4).
2.
Remove halfshaft retaining capscrew (6) and lockwasher (5) from halfshaft (9) and geared hub (4).
Discard lockwasher (5).
3.
Remove six capscrews (3), two-piece lockwashers (2), and halfshaft (9) from rotor (1) and output
NOTE
4.
Remove cotter pin (15), washer (16), clevis pin (18), and parking brake clevis (17) from lever (14).
Discard cotter pin (15).
5.
Remove clip (13) and disconnect cable (11) from caliper cable bracket (12). Discard clip (13).
2
3
1
12
13
4
10
5
7
6
14
11
8
16
15
17
9
6-5