TB 9-2320-335-13&P
3-7.1. ENGINE OIL COOLER SUPPLY AND RETURN LINES MAINTENANCE
(SERIAL NUMBERS 300000 AND ABOVE) (Cont'd)
c. Installation
NOTE
Use of a longer capscrew may be necessary for installation of oil
lines bracket.
1.
Install three tiedown straps (5), (10), and (28) on engine oil and power steering lines.
2.
Install oil line (13) on oil lines bracket (23) with two clamps (6) and (7), lockwasher (18),
capscrew (19), washer (8), and locknut (9). Tighten locknut (9) to 6 lb-ft (8 Nm).
3.
Install oil line (13) on engine mount bracket (17) with two clamps (15) and (16) and capscrew (14).
4.
Install oil lines bracket (23) on steering gear case (24) with capscrew (20), lockwasher (21), and
washer (22).
5.
Install oil and power steering lines bracket (3) on airlift bracket (4) with capscrew (1), washers (2)
and (27), lockwasher (26), and locknut (25).
6.
Connect supply line connector (29) to oil cooler port (30).
7.
Connect supply line connector (12) to adapter (11).
1
2
3
5
10
4
7
9
11
8
6
12
18
13
30
19
17 16 15
29
27
25
FRONT
14
26
24 23
OF
LE
22
VEHIC
21
28
20
FOLLOW-ON TASKS: Install oil filter (TM 9-2320-387-24-1).
Fill oil to proper level (TM 9-2320-387-10).
Start engine (TM 9-2320-387-10) and inspect for leaks at engine oil cooler, supply,
and return lines.
3-3