OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued.
Not Fully Mission
Inspect front suspension springs and
Any cracks, breaks, loose hardware, or
mounting hardware for cracks, breaks,
damage to suspension springs is noted.
loose, or missing hardware and/or
shackles. Notify your supervisor of any
Inspect cab mounts for evidence of dete-
rioration, over-compression, or loose
mounting hardware. Notify your super-
visor of any damage or looseness found.
Inspect wheel lug nuts and wheel rim Two or more studs or nuts are missing
bolts/nuts for looseness (e.g., polished from the same wheel.
surface, rust, or minor cracks around
bolt and wheel mating surfaces). Notify
your supervisor of any looseness found.
Check all armor kit mounting hardware
for loose or missing hardware. Notify
your supervisor of any loose or missing
mounting hardware found.
a. Ensure there is no damage to straps Escape hatch door will not latch closed
and mounting hardware.
b.Inspect for damage to escape hatch
seal. Notify your supervisor of any
Check both door assembly seals, hard- Door assembly is damaged, loose, miss-
ware, and door stops for damaged or ing, or mounting bolts are loose or miss-
loose components. Notify your supervi- ing.
sor of any damage found.
END OF WORK PACKAGE
0009 00-13/(0009 00-14 Blank)