OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued.
Not Fully Mission
Side Armor a. Inspect wheel well blast deflector for Any wheel well blast deflector is dam-
damage, loose, or missing mounting aged or mounting hardware is loose or
b.Inspect wheel well blast deflector Any corrosion where area is unsound
and small pin holes are present, or a
frame for areas of rust or corrosion.
rusted through condition is present.
c. Inspect A-pillar and B-pillar armor Any side A-pillar and B-pillar armor or
panels and door assembly for damage, door assembly is damaged or mounting
loose, or missing mounting hardware. hardware is loose or missing.
d.Inspect A-pillar and B-pillar frames Any corrosion where area is unsound
and door assembly frames for dam- and small pin holes are present, or a
age, loose, or missing mounting hard- rusted through condition is present.
e. Inspect door ballistic glass mounting Any ballistic glass mounting hardware
hardware for damage, loose, or miss- is damaged, loose, missing, or mounting
bolts are loose or missing.
ing mounting hardware.
f. Inspect exterior surface of door ballis-
Rock chips, cracks with spider webbing,
tic glass for rock chips, cracks,
scratches, pitting, or damage in the exte-
scratches, pitting, any damage that
rior layer of ballistic glass that expose
expose glass below the first layer,
glass below the first layer, cloudiness
cloudiness, or any stickers that impair
that impairs vision.