To simplify wire installation, you may wish to remove high idle switch from mounting bracket
before installing wires. Re-install high idle switch after installing wires.
7. Install wire 1516 (9) on high idle switch (7) with screw (8).
8. Install wire 1843 (6) on high idle switch (7) with screw (5).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
9. Apply sealant on wire 1516 (9), screw (8), wire 1843 (6), and screw (5).