· BE AWARE of CARC paint exposure symptoms; symptoms can occur a few days after initial
exposure. Seek medical help immediately if symptoms are detected.
· Use only in well-ventilated area. Check with local environmental office for methods and locations
approved for painting in accordance with local and state environmental regulations.
· Always use air line respirators when using CARC paint unless air sampling shows exposure to
be below standards. Use chemical cartridge respirator if air sampling is below standards.
If air lines are under pressure when they are disconnected, they can whip around. Use care
when loosening or disconnecting air line fittings. Failure to comply may result in injury or
death to personnel.
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
· Tag and mark air lines prior to removal to ensure proper installation.
· Note location and position of fittings prior to removal to ensure proper installation.
· Note position and remove cushion clips and cable ties as required.
Table 1. Air Line Locations.
Tee on Driver Side Tire Heavy-Duty Winch Ten-
Heavy-Duty Winch Ten- Heavy-Duty Winch Ten-