Pump Module Top And Rear Doors Removal
Remove cushion clip for high mount stop lamp harness as required
Pump module top door has only one push rod.
Soldier A removes nuts (1) and lockwashers (2) from lower end of both push rods (3) while Soldier B
supports door (4).
Remove nuts (5) and lockwashers (6) from upper end of both push rods (3).
Remove eight nuts (7), lockwashers (8), and screws (9). Remove door (4).
Model B has a hasp and lock to secure rear doors.
Drill out four rivets (9.1) and remove staple (9.2) from center post.
Follow same process for rear and top doors.